Skip to main content

Power Cords 101: A Brief Guide

 Power cable types are innumerable. The intricacies of which type of power cable connector belongs to which appliance and gadget are complex. Some cables are wired to the appliance, while others can be detached. This generally depends on two factors: the device's portability and the appliance's voltage requirement. 

So how many power connector types exist? Let's go through them! There are two main types in the US: NEMA, short for National Electrical Manufacturers Association, and IEC, short for International Electrotechnical Commission.

The types of NEMA connectors are 1-15, 5-15, and 5-20, and IEC connectors are C5/C6, C7/C8, C13/C14, C15/C16, and C19/C20. 

NEMA

A fair amount of cables contain NEMA 1-15, 5-15, or 5-20 connectors to an outlet. The older and ungrounded type of connector that has two metal prongs is the 1-15. Generally, one is a little larger than the other, but these prongs were the same size on the old cables. 1-15, which is the grounded type, has seen an update in the 5-15, which is three-pronged. 5-15 and 5-20 look similar, with the key difference being that one of the metal prongs is horizontal instead of vertical. 5-15 are not rated as high as 5-20 for amperage and are most commonly used for hospital equipment. 

IEC

For devices that have international usage, IEC cables are used, including but not limited to computers, kitchen appliances, etc. These connectors are not referred to as male and female but given their unique number. For instance, a C6 is the male version of a C5. To avoid confusion, remember that the male side will always be even numbers, and the female side will be odd numbers. 

C5/C6

C5/C6 will have three circular holes connected. Frequently, these are called "Mickey Mouse" connectors because their shape bears a resemblance to the famous Mouse symbol. Most commonly, they are seen on laptop power supplies. 

C7/C8

C7/C8 resembles figure 8 and can be seen on older TVs, laptop power supplies, and smaller DVD players. These are generally paired with 1-15 NEMA connections. Non-polarized and polarized are the two different versions of the C7/C8. Both sides of the connector are round in the non-polarized version. One side will be flat in the polarized version. You need to make sure to figure out which version you require to guarantee the power cable will fit your device. 

C13/C14

C13/C14, AKA a Universal Power Cord, is the current standard for TVs and desktop computers. Older laptop power supplies, which were smaller devices, used a C13/C14. Nowadays, these smaller devices use scaled-down options like C5/C6.

C15/C16

C15/C16 and C13/C14 look similar, the only difference being that C15/C16 has a notch above the prong used for grounding. C15/C16 is primarily used for high voltage equipment, like insulators. These cables are rated for high temperatures generated by extra electricity.

C19/C20

A step up from C15/C16 is C19/C20, which is rated for even higher amperage. It is most commonly used in areas with abundant power running through cables, like data centers or hospitals. 

And these are all the most popular power cords. We stock all of them and will be happy to be your power connector supplier! 

Source: https://www.sfcable.com/blog/power-cords-101-brief-guide

Comments

Popular posts from this blog

What is the Difference between C13 and C15 Power Cords?

There is an array of power cords available in the market. It can get quite perplexing to choose the one that will fit your needs. In order to know more about them, you must have more information about these cords. This article will acquaint you with   IEC C13   and   IEC C15   power cords   and how they are different from each other. But before that, let us understand what IEC is. IEC stands for International Electrotechnical Commission. Every cord is standardized by IEC before it is introduced in the market. These cords use the letter “C” which is followed by the number in their cords. Let’s get back to understanding the difference between IEC-C13 and C15 connectors. Some of them are mentioned below. Difference of a Notch One of the most apparent differences between the two connectors is the notch on C15 connector. Although C15 looks quite similar to C13, it has a little groove opposite the earth. The IEC-C15 connectors also work in the C14 outlets. B...

Power Splitter vs. Extension Cord: Which One Is Right for You

Power distribution is a crucial aspect of managing electrical devices efficiently. When faced with the need to connect multiple devices to a single power source, two popular options come to mind: power splitters and extension cords. Understanding the differences between these two solutions is essential to ensuring optimal power management and safety. In this article, we will explore the features, applications, and considerations associated with power cord splitters and extension cords, helping you make an informed decision on which one is right for your specific needs. Power Splitters: Unleashing Versatility  Power splitters, also known as cord splitters or power cable splitters, are designed to divide a single power source into multiple outlets. These devices allow you to connect several devices simultaneously, expanding the number of electrical connections available. Power cord splitters come in various configurations, including three-way, four-way, and even more complex ...

Fiber Optic Cables Vs Ethernet Cables: What Is the Difference?

Wi-Fi is like love. Always in the air and ready to connect you with the fascinating digital world. But ever wondered what keeps it in the air? Well, just like any relationship has a foundation of understanding, a wireless network has a fiber cabling underneath that helps people to connect with the internet anytime they want to. The other most popularly used cable type is Ethernet cables. They are used everywhere right from IP camera technologies to LED lighting. These cables are quite cheaper as compared to fiber cables; but when one wants to have a huge and powerful network cable , fiber cables become necessary. Both the cables have their advantages and disadvantages, specialties, and limitations. Through this blog, we will differentiate between the two and try to understand both in details: History of Fiber & Ethernet Cables The fiber optic technology was first used in 1969 when NASA sent it to the moon for use in television cameras. And a company named Xerox developed Eth...