Skip to main content

Fiber Optic Patch Cables: Here's All You Should Know

The basic definition of patch cables means an electronic cable which connects electronic devices. It allows the transmission of data between them. There are different types of patch cables in the market with fiber optic patch cables being one of the types. Other types include microphone, headphones, RCA, and ethernet.

Fiber optic patch cable, cord or often known as optical jumper, is a fiber cable terminated with fiber optic connectors (LC, SC, MTRJ, ST, and more) at each of their ends. These connectors allow the cord to stay connected to an optical switch or other computing devices. These cords are ideal for indoor use in server rooms, data centers, medical imaging, mechanical engineering, LAN applications, Cable TV networks, Telephone lines, and more.

If you are looking to buy fiber optic jumper for your system, first you should be aware of its types and functionalities. And then choose according to your requirements.

Let’s dive in!

Armored Fiber Patch Cord: It is stronger than the standard fiber patch cord containing all its features. Armored fiber patch cord is resistant to adults’ stepping and is anti-rodents. It is as flexible as a standard fiber optic patch cord.


Bend Insensitive Fiber Patch Cord: It is resistant to bend related damages. It contains a small cable bending radius and prevents additional bend damages by its inventive core design. And also because of its low macro-bending sensitivity. It supports data center, FTTH applications, and high-density cabling that have to be wrapped and adjusted in the tight corners.

Mode Conditioning Fiber Patch Cord: It is a duplex multimode fiber patch cord which has a small length of single mode fiber at the starting point of the transmission length. It is to solve technical issues involved when using single-mode equipment on the existing multimode cable plant. This type of cables’ major aim is to drive the distance of installed fiber plant beyond its original applications as well as to improve data signal quality.

Low Insertion Loss Fiber Patch Cable: It looks similar to common patch cable by its appearance. But its connectors at the ends contain relatively less insertion loss.

Uniboot Fiber Patch Cord: These cords terminate with specially designed LC uniboot connectors. This fiber patch cable unites two fiber in a single cable which delivers high better performance in the high-density cabling environment. It cuts down the cable count up to 50%. It represents the best fit for places where there’s a scarcity of place.

Switchable Fiber Patch Cord: It enables fast polarity change in the field without needing special tools or training. With a compact design, switchable fiber patch cord attributes to more efficient cable management in high-density environment.

And Here’s How To Choose The Right Fiber Optic Jumper:

Step 1: Choose The Right Connector Type

The ends of fiber optic patch cord contain different connectors including LC, SC, ST, FC, MPO, and MTP. Kindly note that these connectors are for different devices. If you want to connect similar ports type devices, use connectors with the same type of connectors on both ends such as LC-LC, SC-SC, MPO-MPO. If you want to connect different ports type devices, LC-SC, LC-ST, LC-FC cables might help.

Step 2: Consider The Mode

These patches are available in two types of modes: Single-mode and multimode. Single-mode patch cables are ideal for long-distance data transmission. If you are looking for relatively shorter distances, multimode fiber optic patch cord could be an ideal choice.

Step 3: Simplex Or Duplex Cable?

Simplex means the fiber patch cable contains a single strand of glass or plastic fiber. It is generally used where only a single receive or transmit line is required between devices. Duplex means two fiber patch cables put side by side for common transceivers. Duplex cable type contains two strands of glass or plastic in comparison with the simplex cable.

Step 4: The Right Cable Length

These cables come in different length. Starting from 0.5m to 50m. It is of utmost importance to choose an appropriate length according to the distance between the devices you wish to connect.

Step 5: Connector Polish Type

There are two connectors available. APC and UPC. APC connectors are suitable for applications like FTTx, passive optical network and wavelength-division multiplexing. However, it is more expensive than UPC connector. For less sensitive digital system, UPC connects would be ideal.

Step 6: Choose The Cable Jacket Type

There are three jacket types: Polyvinyl chloride, Low smoke zero halogen, and Optical fiber nonconductive plenum.
  • PVC is ideal for horizontal runs from the wiring center.
  • LSZH is good to use between floors in commercial or residential buildings.
  • OFNP is good for vertical runs between floors and other applications.
Fiber products offer a wide selection of fiber optic jumpers with a variety of connectors, length, and cable types. The main thing is to consider your key requirement and choose the correct cable according to that to make the most out of it.

Do not consider fiber optic patch cables with normal cables. Here’s what you need to know about fiber optic patch cables to select the right one for you.


Labels:

Comments

Post a Comment

Popular posts from this blog

What is the Difference between C13 and C15 Power Cords?

There is an array of power cords available in the market. It can get quite perplexing to choose the one that will fit your needs. In order to know more about them, you must have more information about these cords. This article will acquaint you with   IEC C13   and   IEC C15   power cords   and how they are different from each other. But before that, let us understand what IEC is. IEC stands for International Electrotechnical Commission. Every cord is standardized by IEC before it is introduced in the market. These cords use the letter “C” which is followed by the number in their cords. Let’s get back to understanding the difference between IEC-C13 and C15 connectors. Some of them are mentioned below. Difference of a Notch One of the most apparent differences between the two connectors is the notch on C15 connector. Although C15 looks quite similar to C13, it has a little groove opposite the earth. The IEC-C15 connectors also work in the C14 outlets. But the IEC-C13 connector
Post a Comment
Read more

How to Improve Your Internet Speed

When your internet speed is slow, you start blaming the game. But it is important to find out the root cause behind that. Today, we are here with a list of solutions which you can apply to achieve an ideal internet set up rendering high-speed data. Here’s how you can increase the internet speed: Choose The Mobile Operator Wisely There is a smart way of doing that. Find out the mobile service provider which would give you the fastest service at your preferred locations. Gather a group of friends with various mobile devices and perform a speed test together. You can even organize a speed test meet up where you can visit your friend’s house turn by turn. Note that, it is important to restart the Wi-Fi connection before you run the test. You can achieve faster speeds by even switching the service providers with each other. Fix The Wi-Fi Dead Spots You can run the speed tests in the areas where you use Wi-Fi to find out if it’s a dead spot. If you encounter a problem at that p
Post a Comment
Read more

How to Distinguish Between C5 and C7 Power Cords?

There is no doubt that the functionality of electronic equipment is significantly influenced by the power cords. When you choose to work with electrical appliances, you may have come across several kinds of cords including c5 power cords and c7 power cords .  However, what is crucial is understanding that these two power cords are not the same entirely. They come with significant differences. Wondering what those are? Well, before you pick between these for your electronic gadget, let's discover the difference they both share. What is Meant by c5 Power Cords? The first types of cord are the C5 power cords which are basically three-pronged and are also known as the "Mickey Mouse" connectors. This is because they have a very unusual design and are used for laptops and other compact electronic devices.  These types of power cords connect easily to the power source and come with a Clover shape connector that fastens to the power adapter. One of the main advantages of the c5
Post a Comment
Read more