Skip to main content

Tips to Run Cables Into An Industrial Computer Enclosure

Plenty of planning goes to build a system that protects computer hardware and any type of peripherals. During the building phase of the industrial computer enclosure, a common question arises by many of the end-users is how to power electronics inside a sealed enclosure. And that too when there is almost no place for the computer cables.

Stated as ‘fully-sealed’, waterproof units are the industrial computer enclosures with an industry standard rating of IP56. They do not include a traditional split panel to feed additional cables into the enclosure.

Most enclosure system comes with a fit cable entry gland with a maintained seal. They come with a clean, safe entry point to cable and reach the computer equipment.

When you are in the market for an industrial computer enclosure, there are many types of cable glands available that suit specific enclosure applications.

But before finalizing any one for your project, keep these five things in mind to feed cables into the unit.

Point of Entry

In a scenario, where particularly water is present, it is wise to insert cables into enclosures from the below side if the system is wall-mounted. But for the modular and freestanding system, you can insert cables from the downward direction. Because if you keep feeding wires from the above direction, it will lead to water penetration where droplets flow down on the cables.

Cable Diameters

The type of cable gland needed for your enclosure application is totally dependent on the width of the wiring you want to set into the unit. Sealed cables glands are available in various sizes for different cable diameters. For example, formats ranging from 0.3" ~ 1.5" to pass through the same gland exist that allow several wires.

These glands are manufactured in various materials:

  • Aluminum
  • Brass
  • Plastic
  • Rubber
  • Steel
To decide that ideal cable gland configuration for your type of enclosure application, you would need to consult an enclosure expert.

Open Version Cable Glands

They are an ideal solution for industrial computer enclosures. Particularly for pre-terminated cables, it can be a challenge to find the right cable gland. Because the end of the plug would be significantly larger than the cable width.

Thus, choose computer cables glands which are permeable. It allows for quick installation of pre-terminated cables with already attached connectors. This can happen when you cut the disruption to the operational function of your computer system.

System Changes and Upgrades

We would recommend you to choose a flexible cable gland keeping in mind the future system changes and upgrades. Technology is a dynamic domain. It will be changing constantly and continue to develop at an accelerated rate. On the contrary, the computer enclosure will last for years. Mostly, you will be facing a situation where you are replacing the computer hardware a few times till your manufacturing facility needs a new enclosure.

Keeping that in a loop, investing for a flexible gland configuration will let you easily repair systems, replace or upgrade them. When looking for computer adapters and cables make sure you consult with the enclosure expert to discuss the important things related to it.

Safety

In this golden age of computers are used across industrial facilities, the cables can cause hazards. Therefore, safety is a paramount feature on the manufacturing floor. Asses the positions of your enclosure, resolve the concealment of cables in a safer way prior to the installation.

Operational performance and reliability are central points of an enclosure installation. If you haven’t planned properly you would have to compromise cable entry and the protection of your computer hardware in the wet and humid environments. Because if you haven’t planned the necessary precautions, then water will definitely find the way in.

Wrapping it up:

It is important to follow important steps while looking for computer adapters and cables for your computer enclosure. As mentioned above if you follow the correct practices and take necessary precautions, you can keep your computer enclosure safe. You can prevent any hazardous damage and can plug your devices rightly whenever needed!

This Article is originally posted here; Tips to Run Cables Into An Industrial Computer Enclosure

If you found this article useful, here are some other Articles that may be of interest.


Labels:

Comments

Post a Comment

Popular posts from this blog

What is the Difference between C13 and C15 Power Cords?

There is an array of power cords available in the market. It can get quite perplexing to choose the one that will fit your needs. In order to know more about them, you must have more information about these cords. This article will acquaint you with   IEC C13   and   IEC C15   power cords   and how they are different from each other. But before that, let us understand what IEC is. IEC stands for International Electrotechnical Commission. Every cord is standardized by IEC before it is introduced in the market. These cords use the letter “C” which is followed by the number in their cords. Let’s get back to understanding the difference between IEC-C13 and C15 connectors. Some of them are mentioned below. Difference of a Notch One of the most apparent differences between the two connectors is the notch on C15 connector. Although C15 looks quite similar to C13, it has a little groove opposite the earth. The IEC-C15 connectors also work in the C14 outlets. But the IEC-C13 connector
Post a Comment
Read more

How to Improve Your Internet Speed

When your internet speed is slow, you start blaming the game. But it is important to find out the root cause behind that. Today, we are here with a list of solutions which you can apply to achieve an ideal internet set up rendering high-speed data. Here’s how you can increase the internet speed: Choose The Mobile Operator Wisely There is a smart way of doing that. Find out the mobile service provider which would give you the fastest service at your preferred locations. Gather a group of friends with various mobile devices and perform a speed test together. You can even organize a speed test meet up where you can visit your friend’s house turn by turn. Note that, it is important to restart the Wi-Fi connection before you run the test. You can achieve faster speeds by even switching the service providers with each other. Fix The Wi-Fi Dead Spots You can run the speed tests in the areas where you use Wi-Fi to find out if it’s a dead spot. If you encounter a problem at that p
Post a Comment
Read more

How to Distinguish Between C5 and C7 Power Cords?

There is no doubt that the functionality of electronic equipment is significantly influenced by the power cords. When you choose to work with electrical appliances, you may have come across several kinds of cords including c5 power cords and c7 power cords .  However, what is crucial is understanding that these two power cords are not the same entirely. They come with significant differences. Wondering what those are? Well, before you pick between these for your electronic gadget, let's discover the difference they both share. What is Meant by c5 Power Cords? The first types of cord are the C5 power cords which are basically three-pronged and are also known as the "Mickey Mouse" connectors. This is because they have a very unusual design and are used for laptops and other compact electronic devices.  These types of power cords connect easily to the power source and come with a Clover shape connector that fastens to the power adapter. One of the main advantages of the c5
Post a Comment
Read more