Skip to main content

Ultimate Guide to DisplayPort Cables

DisplayPorts make display cable selection easier. A standard DisplayPort cable has a design, which works with any DP-Source device. Devices such as a PC or laptop, and any DP-monitor connect swiftly with a DP. In brief, a standard DisplayPort cable, works with the very first DP-systems and displays, introduced around five years ago.
3ft-displayport-male-to-male-cable-with-latch-adcHowever, if you intend to connect your computer to TV, then HDMI is going to be your wisest choice. High Definition Multimedia Interface (HDMI) is the most popular in the general marketplace. This is because every new TV is HDMI capable.
Moreover, they also work with the new upgraded and future systems. They work with displays that support multi stream and display resolutions up to 4K (Ultra HD) at 60Hz. You can also use a standard DisplayPort cable between a PC and a multi-stream hub. You can also use it between daisy chainable multi stream monitors. You do not need to worry about getting a special cable for supporting certain DisplayPort capabilities.
DisplayPort Cable also offer screen-refresh rates up to 144 Hz at 4K. It also offers reduced screen tearing alternatives. You can add DisplayPort Cable in the factor of higher graphics. The ability to support audio makes DisplayPort Cable a favorite option among the people in the gaming community.

Some Exceptions

We should note that there is one rare exception to its use. There are some Reduced Bit Rate (RBR) cables on the market, which support only up to 1080p. However, its use has a restriction. Its use has a limit up to projector installation applications. Unless identification of the cable is RBR, it is a standard DisplayPort cable. It will support all displayport related configurations.

Cable Types

Despite what you may have come across, there is no such thing as a DisplayPort 1.1 cable and DisplayPort 1.2 cable. A typical DisplayPort cable, including the DP 1.1 cable, supports the entire DP configuration including the new capabilities enabled by DP 1.2.
On the other hand, it also consists of 4K and multi-stream capabilities. All standard DisplayPort cables support RBR, HBR (High Bit Rate), and HBR2 (High Bit Rate 2), which can support 4K at 60Hz, or up to four 1080p displays using multi-stream.
When you purchase your new computer, be sure to choose the right monitor for the job. DP 1.2 has been the standard for viewing high-resolution content on consumer monitors. It also can handle video resolutions as high as 3,840 x 2,160 at 60fps, and up to 17.28 Gbits/sec of bandwidth.
The new Display Port 1.3 and 1.4 versions both carry increased bandwidth capabilities. The resolution is also as high as 7,680 x 4,320 (8K). It also tends to be the choice for video editing. If anyone is looking for the ability to output to multiple displays by daisy chaining through a splitter, DisplayPort 1.3 or DisplayPort 1.4 is their choice.
Just be aware that if you have an Ultra HD or 4K television you will have to opt for the HDMI 2 version versus the HDMI 1.4 specification. The HDMI 2 version can handle the 10-bit and 12-bit color sampling associated with the higher image quality of these types of televisions, and can also handle a maximum of 18 Gbps per second in bandwidth. This allows for viewing resolutions as high 60fps at 4K. HDMI 1.4 can only handle up to 8-bit color sampling, and is limited to 24fps at 4k resolution.

Type of DP Connectors

One of the most important things you will have to consider in your cable purchase is the connector type. It attaches on each end of the cable. There are two types of DP connectors. The standard DP connector and the smaller mini DP connector are the two types of DP connectors. Standard DP connector is about the size of a USB connector. This type is commonly in use on DP enabled PC monitors.
The smaller mini DP connector is commonly in use for the DP output on notebook PCs including Apple products. The mini DP connector is now also in use for Thunderbolt. This has a wider use on Apple products. In addition, you can connect any DP monitor to a Thunderbolt Source, using a standard DP cable, while achieving DP quality.
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

What is the Difference between C13 and C15 Power Cords?

There is an array of power cords available in the market. It can get quite perplexing to choose the one that will fit your needs. In order to know more about them, you must have more information about these cords. This article will acquaint you with   IEC C13   and   IEC C15   power cords   and how they are different from each other. But before that, let us understand what IEC is. IEC stands for International Electrotechnical Commission. Every cord is standardized by IEC before it is introduced in the market. These cords use the letter “C” which is followed by the number in their cords. Let’s get back to understanding the difference between IEC-C13 and C15 connectors. Some of them are mentioned below. Difference of a Notch One of the most apparent differences between the two connectors is the notch on C15 connector. Although C15 looks quite similar to C13, it has a little groove opposite the earth. The IEC-C15 connectors also work in the C14 outlets. B...
Post a Comment
Read more

Power Splitter vs. Extension Cord: Which One Is Right for You

Power distribution is a crucial aspect of managing electrical devices efficiently. When faced with the need to connect multiple devices to a single power source, two popular options come to mind: power splitters and extension cords. Understanding the differences between these two solutions is essential to ensuring optimal power management and safety. In this article, we will explore the features, applications, and considerations associated with power cord splitters and extension cords, helping you make an informed decision on which one is right for your specific needs. Power Splitters: Unleashing Versatility  Power splitters, also known as cord splitters or power cable splitters, are designed to divide a single power source into multiple outlets. These devices allow you to connect several devices simultaneously, expanding the number of electrical connections available. Power cord splitters come in various configurations, including three-way, four-way, and even more complex ...
Post a Comment
Read more

Fiber Optic Cables Vs Ethernet Cables: What Is the Difference?

Wi-Fi is like love. Always in the air and ready to connect you with the fascinating digital world. But ever wondered what keeps it in the air? Well, just like any relationship has a foundation of understanding, a wireless network has a fiber cabling underneath that helps people to connect with the internet anytime they want to. The other most popularly used cable type is Ethernet cables. They are used everywhere right from IP camera technologies to LED lighting. These cables are quite cheaper as compared to fiber cables; but when one wants to have a huge and powerful network cable , fiber cables become necessary. Both the cables have their advantages and disadvantages, specialties, and limitations. Through this blog, we will differentiate between the two and try to understand both in details: History of Fiber & Ethernet Cables The fiber optic technology was first used in 1969 when NASA sent it to the moon for use in television cameras. And a company named Xerox developed Eth...
Post a Comment
Read more